PA66 GF30 PTFE15

◆ Material : PA66 with 30% glass fiber and wear-resistant modified reinforcement material (15% PTFE) has excellent mechanical and wear resistance properties.

◆ Characteristics : 1. Low friction coefficient, self-lubricating PTFE provides solid lubrication and does not require continuous refueling; Grinding steel, aluminum, copper, and nylon can significantly reduce friction and are suitable for dry friction conditions. The friction coefficient is generally in the range of 0.12-0.20, much lower than that of ordinary GF30 PA66. 2. Excellent wear resistance The wear rate has significantly decreased, making it suitable for continuous reciprocating sliding and rotating friction parts (shaft sleeves, gears, sliders, guide rails). 3. Fiberglass provides high rigidity, high strength, and heat resistance 30% fiberglass ensures load-bearing capacity, HDT (1.8MPa) is usually 240-250 ℃, which can withstand higher continuous use temperatures and has better dimensional stability than pure PA66. 4. Good creep resistance Fiberglass suppresses creep and is suitable for lining parts with sustained pressure and long-term stress. 5. Oil resistant, grease resistant, and resistant to most organic solvents Inheriting the characteristics of PA66 substrate, it has good stability under hydraulic oil, lubricating oil, and hydrocarbon solvents.

◆ Purpose : Dry/low oil lubricated sliding parts: bearing bushings, gears, sliders, guide pins, pneumatic valve sliding components, continuous low-speed, medium load friction, grinding steel, requiring maintenance free and not suitable for refueling structures.

◆ Benchmark Against : PA66+30%GF+15%PTFE,Zytel® WRF403,Leona 1330G

* If you need the material PA66 GF30 PTFE15 or require customized production with special specifications, you can contact us at email sales@anixt.com ,We will reply promptly!