中文简体
English
453 clicks
Low water absorption rate: only about 30% of PA6, stable in size and not easily deformed in wet state.
Low temperature resistance: maintains high toughness at -60 ℃ without brittle cracking.
Oil resistance: resistant to fuel, lubricating oil, hydraulic oil, suitable for automotive/industrial oil circuits.
Wear resistant and self-lubricating: suitable for dynamic friction parts such as gears, bearings, sliders, etc.
Electrical insulation: low dielectric constant, low loss, suitable for electronic/high-frequency components.
Lightweight: Density of about 1.08 g/cm ³, 10%~12% lighter than PA66.
2. Main application areas and typical products
a. Automotive industry (largest application area)
fuel system.
Fuel pipe, fuel delivery pipe, quick connector, storage container, oil cup.
Throttle body, fuel pump components, filter housing.
Braking/Hydraulic/Transmission System.
Brake oil pipe, hydraulic hose, seal, gasket.
Door lock gear, seat adjustment gear/rack, sunroof rail slider.
Bearing cage, universal joint bushing, stabilizer bar bushing.
Surrounding the engine
Turbocharger return pipe, EGR valve bracket, sensor housing.
Cooling system connectors, components resistant to coolant/refrigerant oil.
Electrical system
Engine compartment wiring harness connector, ECU plug, high-voltage terminal block.
Wire sheath, connector housing (precision, plug resistant).
b. Electronic and Electrical
Precision structural components: instrument guide rail, sensor base, micro switch housing.
Battery/energy storage: silver zinc battery case, lithium battery insulation component.
Cable: Insulation layer/sheath of high-frequency cable, communication cable, and oil resistant cable.
Connectors: aviation plugs, industrial connectors (low moisture absorption, size stability).
c. Mechanical and Industrial Manufacturing
Transmission wear-resistant parts: gears, bearings, rollers, guide rails, sliders, bushings.
Sealing/shock absorption: O-ring, gasket, buffer block, dust cover.
Fluid components: oil pipes, hoses, valves, pump bodies, pressure gauge housings.
Textile machinery: guide wire, roller, tension wheel, textile nozzle.
d. Monofilament/spinning (important use of PA610 slices)
High end bristles: toothbrush bristles, industrial bristles, abrasive bristles (wear-resistant, good rebound, acid and alkali resistant).
Nylon monofilament: fishing net thread, sewing thread, mesh wire, eyeglass frame frame wire.
Rope/webbing: high-strength industrial ropes, cable ties, bundling straps.
e. Other high-end applications
Medical devices: surgical instrument handles, precision catheters, disinfectant resistant components (ethylene oxide resistant).
Sports equipment: ski boot components, fishing gear, racket accessories (low temperature resistance, good toughness).
Aviation/Rail Transit: Lightweight structural components, oil resistant pipelines, electrical insulation components.
3. Application after modification (glass fiber reinforcement/flame retardant/toughening)
Fiberglass reinforced PA610: hot deformation temperature up to 190 ℃, used for high-strength structural components, automotive structural brackets, and mechanical shells.
Flame retardant PA610: Electronic and electrical flame retardant parts, connectors, switch bases.
Toughened PA610: Ultra low temperature components, automotive anti-collision parts, shock absorbers and buffers.
4. Key selection points for PA610 vs PA6/PA66
Choose PA610: requires low water absorption, high dimensional accuracy, low temperature resistance, oil resistance, and precision small parts.
Choosing PA66: requires higher heat resistance, higher rigidity, and lower cost.
Choosing PA6: requires high toughness.
* The application cases shown may not fully match your target products. Please inform us of your specific requirements, and we will assist you in material selection.
